Mahindra 2816 HST User Manual

16 Series, Model - 2816 HST
65
Implement identification Cat I
Dimensions implement
A – Gap In top of implement mast 44.5 mm (1-3/4 inch)
B – Diameter of holes in top of
Implement mast
19.1 mm (3/4 inch)
C – Diameter of hitch pins 22.2 mm (7/8 inch)
D – Lower Hitch Pin
Inner Shoulder Spread
682.6 mm (26-7/8 Inch)
THREE POINT HITCH SYSTEM
The three point hitch system gives position control and draft control (If
equipped) of implements. This tractor is equipped with a category I hitch.
The three-point hitch dimensions are shown in the following table.
HITCH PIN
MAST
HITCH PIN
FIELD OPERATION ________________________________________________________

Mahindra 2816 HST Specifications

General

Brand	Mahindra
Model	2816 HST
Category	Lawn Mower
Language	English