16 Series, Model - 2816 HST
2
3. Cover the PTO shaft with a
guard when not using.
4. Be sure to engage the brake
and lower any attachment or
implement before
disassembling any part.
5. Never adjust or service the
tractor when it is in motion or
while the engine is running.
Always adjust the brake or
clutch properly in accordance
with the adjusting procedure in
the instruction book.
6. Do not remove the radiator cap
while the engine is running.
Shut down the engine and wait
until it cools sufficiently. For
removal, turn the cap to the first
stop to relieve pressure.
To replace the coolant, use the
coolant recovery tank.
7. Hydraulic oil or fuel escaping
under pressure can penetrate
the skin, causing serious injury.
Before disconnecting oil or fuel
lines, be sure to relieve all
pressure. Before restoring
pressure after repair, be sure all
connections are tight and all
hydraulic components are in
normal condition. If injured by
leaked fluid, see a doctor
immediately for proper
treatment.
8. When refueling, be particularly
careful first to stop the engine
completely to prevent the fuel
from igniting. Never refuel in the
presence of an open flame or
while smoking.
SAFETY/DECALS_______________________________________________________
To Next Page
Loading...
Need help?
General
