OPERATING CONTROLS AND FEATURES GRT9165 OPERATOR MANUAL
3-32 Published 7-23-2020, Control # 668-02
Hoist Rotation Indicators
Hoist Rotation Indicators (27, Figure 3-17) for auxiliary and
main hoists are located at mid-stick, facing the operator on
each dual-axis hoist controller (2, 21, Figure 3-17).
The Hoist Rotation Indicator pulses on the auxiliary or main
hoist controller (2, 21) when its related hoist is operating.
The pulsing, felt by the operator’s hand, indicates to the
operator that the hoist is operating.
The Hoist Rotation Indicator also makes an audible click
when it pulses.
The frequency of the pulses and clicks increases and
decreases as the hoist speed increases and decreases.
Seat Switch
The Seat Switch (28, Figure 3-17) is located within the seat.
The operator must be sitting in the seat, enabling the switch,
before any crane functions can be operated.
To Next Page
Loading...
Need help?
General
