Grove 1-7
GRT9165 OPERATOR MANUAL INTRODUCTION
Published 7-23-2020, Control # 668-02
Boom
Length . . . . . . . 13.7 m to 62.5 m (44.9 ft to 205 ft)
Power . . . . . . . . . . . . . . . 6 Section, MEGAFORM™
Pinning . . . . . . . . . . . TWIN-LOCK™ Boom Pinning
Max Tip Height without
Extension. . . . . . . . . . . . . . . . . . . . 65.2 m (214 ft)
Elevation . . . . . . . . . . . . . . . . . . . . . . . . -2° to +80°
Boom Extensions (Optional)
Manual Bi-Fold Lattice Swingaway
Length . . 11.2 m to 17.8 m (36.7 ft to 58.4 ft)
Manual Offsets at . . . . 0°, 15°, 30°, and 50°
Maximum Tip Height . . . . . . . 83.2 m (273 ft)
Hydraulic Bi-Fold Lattice Swingaway
Length . . 11.2 m to 17.8 m (36.7 ft to 58.4 ft)
Hydraulic Offsets from . . . . . . . . . . .0° to 50°
Maximum Tip Height . . . . . . . 83.2 m (273 ft)
Outriggers
Outrigger Spread
Retracted. . . . . . . . . . . . . . . 3558 mm (140 in)
Mid Extend . . . . . . . . . . . . . 6022 mm (237 in)
Fully Extended . . . . . . . . . . 8486 mm (334 in)
Outrigger Pad Diameters
Polymer. . . . . . . . . . . . . . . . 500 mm (19.68 in)
Aluminum . . . . . . . . . . . . . . 610 mm (24.06 in)
Max Individual Outrigger
Pad Load . . . . . 738.4 kN (166,000 lbf or 166 kip)
Swivel Assembly
Electrical. . . . . . . . . . . . . . . . . . . . . . . 20 Slip Rings
Hydraulic . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ports
Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ports
Air Conditioning . . . . . . . . . . . . . . . . . . . . . . 2 ports
Hydraulic Pumps
NOTE: Pump flow rate (output) figures are theoretical.
Pump #1
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Piston
Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Output - @ loaded engine speed
Section 1 flow rate . . 253 L/min (66.8 gal/min)
Pump #2
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Piston
Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Output - @ loaded engine speed
Section 1 flow rate . . 184 L/min (48.6 gal/min)
Pump #3
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gear
Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Output - @ loaded engine speed
Section 1 flow rate . . 119 L/min (31.4 gal/min)
Pump #4
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gear
Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Output - @ loaded engine speed
Section 1 flow rate . . . 58 L/min (15.3 gal/min)
Hoists
Drum Dimensions
Diameter . . . . . . . . . . . . . . . 371 mm (14.61 in)
Length. . . . . . . . . . . . . . . . . 550 mm (21.63 in)
Cable, Main, 35x7 Steel
Diameter . . . . . . . . . . . . . . . . . 19 mm (0.75 in)
Length. . . . . . . . . . . . . . . . . . . 294 m (964.5 ft)
Max Permissible
Line Pull . . . . . . . . . . . . 7784 kg (17,160 lb)
Cable, Aux., 35x7 Steel
Diameter . . . . . . . . . . . . . . . . . 19 mm (0.75 in)
Length. . . . . . . . . . . . . . . . . . . 233 m (764.4 ft)
Max. Permissible
Line Pull . . . . . . . . . . . . 7784 kg (17,160 lb)
Max. Single Line Speed at: . 140 m/min (459 ft/min)
Motor Displacement. . . . . . . . . . . . . 80 cc (4.88 in³)