Manitowoc VPC-MAX MLC650 - Installing the Actuator; Handling the Actuator

SET-UP AND INSTALLATION MLC650 VPC-MAX™ OPERATOR MANUAL
4-16
Published 04-06-18, Control # 231-14
Installing the Actuator
See Figure 4-18 for the following procedure.
Handling the Actuator
1. Remove the two plates (1) and four pendants (2) from
the counterweight tray assembly (3).
FIGURE 4-18
Item Description
1 Plate (qty 2)
2 Pendant (qty 4)
3 Counterweight Tray Assembly