Mar Cor Purification MILLENIUM HX - Page 38

Millenium HX RO System
3030226 Rev. D 3-4 System Operation
4. The screen that will appear will depend on how the RO was left after its last use.
Use the table below to navigate the RO to the Main Screen.
Follow directions to the left of the displayed screen in chart below until you reach
the Main Screen.
Directions
Displayed Screen
Press CANCEL or ABORT.
Connect to RO feed water
and drain (if not already
connected). Press
ACTIVATE FAST COOL if
not already grayed out.
Connect to RO feed water
and drain (if not already
connected). Press START.
If button says RINSING no
further action is required
in this screen.
Press EXIT.
Proceed to next step.