SETTINGS S-2
From this screen, the operator can adjust the Base Pump
Pressure, the Storage Sani Time Trigger and the Storage Sani Day
of Week Selection.
Base Pump Pressure is user adjustable from 100-200 PSI.
Storage Heat is user settable. The user may select the time to
start the heat disinfection (Storage Sani Time Trigger) and the
days of the week for the heat disinfection (Storage Sani Day of
Week Selection). If the day is visible, the RO will heat disinfect at
the specified time on that day.
The operator can return to the Main Screen by pressing RETURN
TO MAIN.
The TEST MODE is password protected and intended for trained
personnel use only.
To Next Page
Loading...
