Mar Cor Purification MILLENIUM HX - Page 82

Millenium HX RO System
3030226 Rev. D 4-30 Screen Operation And Specifications
Recommended separation distances between portable and mobile RF communications equipment and the
Millenium HX
The Millenium HX is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the Millenium HX can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters)
and the Millenium HX as recommended below, according to the maximum output power of the
communications equipment.
Rated maximum output power
of transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
D = 1.2P
80 MHz to 800 MHz
D = 1.2P
800 MHz to 2.5 GHz
D = 2.3P
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at the maximum output power not listed above, the recommended separation distance
d in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is
the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.