Matrix mvBlueFOX3 User Manual

mvExposureAutoAverageGrey
common desired average grey value (in percent) used for Auto Gain Control (AGC) and
Auto Exposure Control (AEC).
•
mvExposureAutoAOIMode
common AutoControl AOI used for Auto Gain Control(AGC), Auto Exposure Control(AEC)
and Auto White Balance(AWB).
•
mvAcquisitionMemoryMode
MATRIX VISION offers three additional acquisition modes which use the internal memory of
the mvBlueCOUGAR-X:
mvRecord
which is used to store frames in memory.
♦
mvPlayback
which transfers stored frames.
♦
mvPretrigger
which stores frames in memory to be transferred after trigger.
To define the number of frames to acquire before the occurrence of an
AcquisitionStart or AcquisitionActive trigger, you can use mvPretriggerFrameCount.
See also:
The use case Recording sequences with pretrigger shows how this feature
works.
♦
•
mvAcquisitionMemoryMaxFrameCount
which shows the maximum of frames the internal memory can save.
See also:
The use case Working with burst mode buffer lists some maximum frame counts of
some mvBlueCOUGAR-X models.
•
mvSmearReduction
smear reduction in triggered and non-overlapped mode.
•
For "Exposure Auto Mode", in wxPropView just select in "Exposure Auto" "Continuous".
Afterwards, you have the possibility to set lower and upper limit, average gray combined with AOI
setting:
Figure 2: Acquire Control -> Exposure Auto
12 GenICam and Advanced Features
105

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English