signal or physical input Line to use
as the trigger source.
mvLogicGateOR1Output: Specifies
the internal signal or physical input
Line to use as the trigger source.
mvLogicGateOR2Output: Specifies
the internal signal or physical input
Line to use as the trigger source.
mvLogicGateOR3Output: Specifies
the internal signal or physical input
Line to use as the trigger source.
mvLogicGateOR4Output: Specifies
the internal signal or physical input
Line to use as the trigger source.
UserOutput0: Specifies which User
Output bit signal to use as internal
source for the trigger.
UserOutput1: Specifies which User
Output bit signal to use as internal
source for the trigger.
UserOutput2: Specifies which User
Output bit signal to use as internal
source for the trigger.
UserOutput3: Specifies which User
Output bit signal to use as internal
source for the trigger.
Counter1End: Specifies which of the
Counter signal to use as internal
source for the trigger.
Counter2End: Specifies which of the
Counter signal to use as internal
source for the trigger.
Counter3End: Specifies which of the
Counter signal to use as internal
source for the trigger.
Counter4End: Specifies which of the
Counter signal to use as internal
source for the trigger.
Counter1Active: Specifies the
internal signal or physical input Line
to use as the trigger source.
Counter2Active: Specifies the
internal signal or physical input Line
to use as the trigger source.
Counter3Active: Specifies the
internal signal or physical input Line
to use as the trigger source.
Counter4Active: Specifies the
internal signal or physical input Line
to use as the trigger source.
Software: Specifies that the trigger
source will be generated by software
20 Appendix A.1 Pregius CMOS specific camera / sensor data
1165
To Next Page
Loading...