Matrix mvBlueFOX3 - Page 1473

device-specific.
Off: Gain is User
controlled using Gain.
Continuous: Gain is
constantly adjusted by the
device.
mvGainAutoUpperLimit 0.000 18.000 - -
The upper limit of the gain
in auto gain mode.
mvGainAutoLowerLimit 0.000 0.000 - -
The lower limit of the gain
in auto gain mode.
mvGainAutoAverageGrey 0 100 1 -
Common desired average
grey value (in percent)
used for Auto Gain
Control(AGC) and Auto
Exposure Control(AEC).
mvGainAutoHighlightAOI - - -
Off,
On
Highlight auto control AOI
to check AOI settings.
Switch off for normal
operation.
Off: Highlight auto control
AOI to check AOI settings.
Switch off for normal
operation.
On: Highlight auto control
AOI to check AOI settings.
Switch off for normal
operation.
mvGainAutoAOIMode - - - mvFull,
mvCenter,
mvUser
Common AutoControl AOI
used for Auto Gain
Control(AGC), Auto
Exposure Control(AEC)
and Auto White
Balancing.
mvFull: Common
AutoControl AOI used for
Auto Gain Control(AGC),
Auto Exposure
Control(AEC) and Auto
White Balancing.
mvCenter: Common
AutoControl AOI used for
Auto Gain Control(AGC),
Auto Exposure
Control(AEC) and Auto
White Balancing.
mvUser: Common
AutoControl AOI used for
Auto Gain Control(AGC),
Auto Exposure
21 Appendix A.2 CMOS specific camera / sensor data
1465