change the bits that have a
corresponding bit in the mask set
to one.
Feature Name Min Max Inc
Valid
Values
Documentation
mvFrameAverageControl
Contains features to control the
frame averaging engine.
mvFrameAverageEnable - - -
0,
1
Enables the frame averaging
engine.
mvFrameAverageMode - - - mvNTo1
Sets the frame average
operating mode.
mvNTo1: Sets the frame average
operating mode.
mvFrameAverageFrameCount 2 16 1 -
Here you specify the frame count
used for the calculation of the
frame average.
Feature Name Min Max Inc
Valid
Values
Documentation
mvDefectivePixelCorrectionControl
Contains features to control the
device's defective pixel correction
parameters.
mvDefectivePixelEnable - - -
0,
1
Activates the sensor's defective pixel
correction.
Feature Name Min Max Inc Valid Values Documentation
LUTControl
A category that includes the LUT control
features.
LUTSelector - - - Luminance
Selects which LUT to control.
Luminance: Selects the Luminance LUT.
LUTEnable - - -
0,
1
Activates the selected LUT.
LUTIndex 0 1023 1 -
Control the index (offset) of the coefficient
to access in the selected LUT.
LUTValue 0 4095 1 -
Returns the Value at entry LUTIndex of
the LUT selected by LUTSelector.
LUTValueAll - - - -
Accesses all the LUT coefficients in a
single access without using individual
LUTIndex.
mvLUTType - - - Direct
Describes the type of LUT used.
Direct: The user can define an output
value for each input value of the LUT.
mvLUTInputData - - - Gray
21 Appendix A.2 CMOS specific camera / sensor data
1616
To Next Page
Loading...