Matrix mvBlueFOX3 User Manual

measured.
Mainboard: Temperature of
the device's mainboard.
Sensor: Temperature of the
image sensor of the camera.
DeviceTemperature
INT_MIN(As
Float)
INT_MAX(As
Float)
- -
Device temperature in
degrees Celsius (C). It is
measured at the location
selected by
DeviceTemperatureSelector.
(C)
DeviceClockSelector - - - Sensor
Selects the clock frequency
to access from the device.
Sensor: Clock frequency of
the image sensor of the
camera.
DeviceClockFrequency INT_MIN INT_MAX - -
Returns the frequency of the
selected Clock. (Hz)
mvDeviceClockFrequency - - - kHz_74250
Clock frequency of the image
sensor of the camera.
kHz_74250: Clock frequency
of the image sensor of the
camera.
DeviceFirmwareVersion - - - -
Version of the firmware in the
device.
mvDeviceFirmwareBuildDate - - - -
The build time and date of
the firmware
DeviceScanType - - - Areascan
Scan type of the sensor of
the device.
Areascan: 2D sensor.
mvDeviceSensorName - - - -
Shows the name of the
sensor.
mvDeviceSensorColorMode - - - BayerMosaic
Shows color mode of the
sensor.
BayerMosaic: Shows color
mode of the sensor.
mvDeviceFPGAVersion - - - -
Shows version number of the
FPGA.
DeviceReset@i - - - -
Resets the device to its
power up state. After reset,
the device must be
rediscovered.
DeviceRegistersStreamingStart@i - - - -
Prepare the device for
registers streaming without
checking for consistency.
21 Appendix A.2 CMOS specific camera / sensor data
1767

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English