(counting).
Counter4Active: The chosen
counter is in active state
(counting).
AcquisitionActive: Device is
currently doing an acquisition of
one or many Frames.
FrameActive: Device is currently
doing the capture of a Frame.
mvReadOutActive: Selects which
internal acquisition or I/O source
signal to output on the selected
Line.
LineActive: Device is currently
doing the capture of a Line.
mvExposureAndAcquisitionActive:
Selects which internal acquisition
or I/O source signal to output on
the selected Line.
FrameTriggerWait: Device is
currently waiting for a Frame start
trigger.
mvTemperatureOutOfRange:
Selects which internal acquisition
or I/O source signal to output on
the selected Line.
mvLogicGateOR1Output: Selects
which internal acquisition or I/O
source signal to output on the
selected Line.
mvLogicGateOR2Output: Selects
which internal acquisition or I/O
source signal to output on the
selected Line.
mvLogicGateOR3Output: Selects
which internal acquisition or I/O
source signal to output on the
selected Line.
mvLogicGateOR4Output: Selects
which internal acquisition or I/O
source signal to output on the
selected Line.
mvExposureActive: Selects which
internal acquisition or I/O source
signal to output on the selected
Line.
LineInverter - - -
0,
1
Controls the inversion of the
signal of the selected input or
output Line.
mvLineDebounceTimeRisingEdge 0 5000 1 - Sets the debounce time in micro
seconds for low to high
20 Appendix A.1 Pregius CMOS specific camera / sensor data
546