Matrix mvBlueFOX3 User Manual

transitions.
mvLineDebounceTimeFallingEdge 0 5000 1 -
Sets the debounce time in micro
seconds for high to low
transitions.
LineStatusAll INT_MIN INT_MAX 0x1 -
Returns the current status of all
available Line signals at time of
polling in a single bitfield.
UserOutputSelector - - -
UserOutput0,
UserOutput1,
UserOutput2,
UserOutput3
Selects which bit of the User
Output register will be set by
UserOutputValue.
UserOutput0: Selects the bit 0 of
the User Output register.
UserOutput1: Selects the bit 1 of
the User Output register.
UserOutput2: Selects the bit 2 of
the User Output register.
UserOutput3: Selects the bit 3 of
the User Output register.
UserOutputValue - - -
0,
1
Sets the value of the bit selected
by UserOutputSelector.
UserOutputValueAll INT_MIN INT_MAX 0x1 -
Sets the value of all the bits of the
User Output register. It is subject
to the UserOutputValueAllMask.
UserOutputValueAllMask INT_MIN INT_MAX 0x1 -
Sets the write mask to apply to
the value specified by
UserOutputValueAll before writing
it in the User Output register. If
the UserOutputValueAllMask
feature is present, setting the user
Output register using
UserOutputValueAll will only
change the bits that have a
corresponding bit in the mask set
to one.
Feature Name Min Max Inc Valid Values Documentation
mvFrameAverageControl
Contains features to control
the frame averaging engine.
mvFrameAverageEnable - - -
0,
1
Enables the frame averaging
engine.
mvFrameAverageMode - - -
mvNTo1,
mvNTo1Sum
Sets the frame average
operating mode.
mvNTo1: Sets the frame
average operating mode.
mvNTo1Sum: Sets the frame
average operating mode.
mvFrameAverageFrameCount 2 27 1 -
20 Appendix A.1 Pregius CMOS specific camera / sensor data
547

Matrix mvBlueFOX3 Specifications

General

Brand	Matrix
Model	mvBlueFOX3
Category	Digital Camera
Language	English