Matrix mvBlueFOX3

chosen I/O Line.
Line5: Starts when the
specified
TimerTriggerActivation
condition is met on the
chosen I/O Line.
Counter1End: Starts with
the reception of the
Counter End.
Counter2End: Starts with
the reception of the
Counter End.
Counter3End: Starts with
the reception of the
Counter End.
Counter4End: Starts with
the reception of the
Counter End.
Timer1End: Starts with
the reception of the Timer
End. Note that a timer
can retrigger itself to
achieve a free running
Timer.
Timer2End: Starts with
the reception of the Timer
End. Note that a timer
can retrigger itself to
achieve a free running
Timer.
mvLogicGateOR1Output:
Selects the source of the
trigger to start the Timer.
mvLogicGateOR2Output:
Selects the source of the
trigger to start the Timer.
mvLogicGateOR3Output:
Selects the source of the
trigger to start the Timer.
mvLogicGateOR4Output:
Selects the source of the
trigger to start the Timer.
UserOutput0: Specifies
which User Output bit
signal to use as internal
source for the trigger.
UserOutput1: Specifies
which User Output bit
signal to use as internal
source for the trigger.
UserOutput2: Specifies
which User Output bit
20 Appendix A.1 Pregius CMOS specific camera / sensor data
825