EasyManua.ls Logo

Matrix mvBlueFOX3 - Page 880

Matrix mvBlueFOX3
1974 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
used to enable the
'AcquisitionFrameRate' feature.
Off: The acquisition frame rate is set
automatically to the limit, calculated
according to
'mvAcquisitionFrameRateLimitMode'
feature.
On: The acquisition frame rate is set
by the 'AcquisitionFrameRate'
feature.
AcquisitionFrameRate 0.100 4000.000 - -
Controls the acquisition rate (in
Hertz) at which the frames are
captured. (Hz)
AcquisitionFrameCount 1 65534 1 -
Number of frames to acquire in
MultiFrame Acquisition mode.
mvAcquisitionMemoryMode - - - Default
mvRecord is used to store frames in
memory. mvPlayback transfers
stored frames. mvPretrigger stores
frames in memory to be transferred
after trigger.
Default: Default memory mode.
mvPretriggerFrameCount 0 28 1 -
Number of frames to acquire before
the occurrence of an AcquisitionStart
or AcquisitionActive trigger.
mvAcquisitionMemoryMaxFrameCount INT_MIN INT_MAX 1 -
Maximum number of frames that can
be recorded in the current
configuration.
mvAcquisitionMemoryFrameCount 0 28 1 -
The number of frames currently
stored in the frame buffer. If this
value keeps increasing this can
indicate a bandwidth/transmission
problem.
mvAcquisitionMemoryAOIParameterChanged INT_MIN INT_MAX 1 -
AOI and/or binning parameter
changed after last Acquisition.
AcquisitionBurstFrameCount 1 65534 1 -
Number of frames to acquire for
each FrameBurstStart trigger.
mvResultingFrameRate 0.100 42.000 - - Shows the resulting frame rate.
Feature Name Min Max Inc Valid Values Documentation
CounterAndTimerControl
A category that contains
the Counter and Timer
control features.
CounterSelector - - - Counter1,
Counter2,
Counter3,
Counter4
Selects which Counter to
configure.
Counter1: Selects the
counter 1.
20 Appendix A.1 Pregius CMOS specific camera / sensor data
872

Table of Contents