Matrix mvBlueFOX3 - Page 881

Counter2: Selects the
counter 2.
Counter3: Selects the
counter 3.
Counter4: Selects the
counter 4.
CounterEventSource - - - Off,
AcquisitionStart,
AcquisitionEnd,
FrameStart,
FrameEnd,
ExposureStart,
ExposureEnd,
Line4,
Line5,
Counter1End,
Counter2End,
Counter3End,
Counter4End,
Timer1End,
Timer2End,
TimestampTick,
LineStart,
mvLogicGateOR1Output,
mvLogicGateOR2Output,
mvLogicGateOR3Output,
mvLogicGateOR4Output
Select the events that will
be the source to
increment the Counter.
Off: Counter is stopped.
AcquisitionStart: Counts
the number of Acquisition
Start.
AcquisitionEnd: Counts
the number of Acquisition
End.
FrameStart: Counts the
number of Frame Start.
FrameEnd: Counts the
number of Frame End.
ExposureStart: Counts
the number of Exposure
Start.
ExposureEnd: Counts the
number of Exposure End.
Line4: Counts the
number of transitions on
the chosen I/O Line.
Line5: Counts the
number of transitions on
the chosen I/O Line.
Counter1End: Counts the
number of Counter End.
Counter2End: Counts the
number of Counter End.
Counter3End: Counts the
number of Counter End.
Counter4End: Counts the
number of Counter End.
Timer1End: Counts the
number of Timer End
pulses generated.
Timer2End: Counts the
number of Timer End
pulses generated.
TimestampTick: Counts
the number of clock ticks
of the Timestamp clock.
Can be used to create a
programmable timer.
LineStart: Counts the
number of Line Start.
20 Appendix A.1 Pregius CMOS specific camera / sensor data
873