Matrix mvBlueFOX3 - Page 882

mvLogicGateOR1Output:
Select the events that will
be the source to
increment the Counter.
mvLogicGateOR2Output:
Select the events that will
be the source to
increment the Counter.
mvLogicGateOR3Output:
Select the events that will
be the source to
increment the Counter.
mvLogicGateOR4Output:
Select the events that will
be the source to
increment the Counter.
CounterEventActivation - - -
RisingEdge,
FallingEdge,
AnyEdge
Selects the Activation
mode Event Source
signal.
RisingEdge: Counts on
the Rising Edge of the
signal.
FallingEdge: Counts on
the Falling Edge of the
signal.
AnyEdge: Counts on the
Falling or rising Edge of
the selected signal.
CounterResetSource - - - Off,
AcquisitionStart,
AcquisitionEnd,
FrameStart,
FrameEnd,
ExposureStart,
ExposureEnd,
Line4,
Line5,
Counter1End,
Counter2End,
Counter3End,
Counter4End,
Timer1End,
Timer2End,
mvLogicGateOR1Output,
mvLogicGateOR2Output,
mvLogicGateOR3Output,
mvLogicGateOR4Output,
UserOutput0,
UserOutput1,
UserOutput2,
UserOutput3
Selects the signals that
will be the source to reset
the Counter.
Off: Disable the Counter
Reset trigger.
AcquisitionStart: Resets
with the reception of the
Acquisition Start.
AcquisitionEnd: Resets
with the reception of the
Acquisition End.
FrameStart: Resets with
the reception of the
Frame Start.
FrameEnd: Resets with
the reception of the
Frame End.
ExposureStart: Resets
with the reception of the
Exposure Start.
ExposureEnd: Resets
with the reception of the
Exposure End.
20 Appendix A.1 Pregius CMOS specific camera / sensor data
874