Matrix Sparsh VP110 User Manual

136 Matrix SPARSH VP110 User Guide
You can also dial the number first, and then choose the way you want to speak to the other party. You can also
search and dial a contact from call history, local directory or remote phone book. For more information, refer to
“Contact Management” and “Call History Management”.
During a call, you can alternate between Speakerphone, Headset and Handset modes by pressing the
Speakerphone key, the Headset key, or picking up the handset.
The call duration of active call is visible on the LCD screen. In the figure below, the call has lasted 26 seconds.
To place a call using the handset:
• Pick up the handset.
• Enter the desired number using the keypad.
• Press OK , , or the Send soft key.
The # key is configured as a send key by default. You can also set the * key as the send key, or set neither. For
more information, refer “Key as Send”.
• You can also dial using the SIP URI or IP address. To obtain the IP address of the phone, press the
OK key. The maximum SIP URI or IP address length is 32 characters. For example, SIP
URI:2210@sip.com,IP: 192.168.1.15.
• Your phone may not support direct IP dialing. Contact your network administrator for more information.
To place a call using the hands-free speakerphone mode:
Do one of the following:
• With the handset on-hook, press to obtain a dial tone.
Enter the desired number using the keypad.
Press OK , , or the Send soft key.
• With the handset on-hook, enter the desired number using the keypad.
Press , OK , , or the Send soft key.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English