Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 241
Distinctive Ring Tones
Distinctive ring tones allows certain incoming calls to trigger IP phones to play distinctive ring tones. The IP phone
inspects the INVITE request for an “Alert-Info" header when receiving an incoming call. If the INVITE request
contains an "Alert-Info" header, the IP phone strips out the URL and keyword parameter and maps them to the
appropriate ring tone.
If the caller has existed in the local directory, the ring tone assigned to the caller should be preferentially
played.
Alert-Info headers in the following formats can be configured:
• Alert-Info: 127.0.0.1/Bellcore-drN
• Alert-Info: ringtone-N (or Alert-Info: MyMelodyN)
• Alert-Info: <URL>
• Alert-Info: info=info text;x-line-id=0
Refer following details about each header format:
• If the Alter-Info header contains the keyword “Bellcore-drN”, and the parameter “features.alert_info_tone”
is set to 1, the IP phone will play the Bellcore-drN (N=1, 2, 3, 4 or 5) ring tone. Otherwise, the IP phone will
play the pre-configured local ring tone in about ten seconds.
Example:
Alert-Info: http://127.0.0.1/Bellcore-dr1
The following table identifies the different Bellcore ring tone patterns and cadences.
BellcoreTone PatternID Pattern Cadence
Minimum
Duration
(ms)
Nominal
Dura tion
(ms)
Maximum
Duration
(ms)
Bellcore‐dr1
(standard)
1
Ringing 2sOn 1800 2000 2200
Silent 4sOff 3600 4000 4400
Bellcore‐dr2 2
Ringing Long 630 800 1025
Silent 315 400 525
Ringing Long 630 800 1025
Silent 3475 4000 4400

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English