Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 25
Configuration Methods
IP phones can be configured automatically through configuration files stored on a central provisioning server,
manually via the phone user interface or the web user interface, or by a combination of the automatic and manual
methods.
The recommended method for configuring IP phones is automatically through a central provisioning server. If a
central provisioning server is not available, the manual method will allow changes to most features.
The following section describes how to configure SPARSH VP110 using each of the mentioned methods:
• Phone User Interface
• Web User Interface
• Auto-Provisioning
Phone User Interface
An administrator or a user can configure and use IP phones via phone user interface. You can customize your
phone by pressing the Menu soft key to access the phone user interface. Access to specific features is restricted to
the administrator. The default password is “1234“. All features are not accessible from the phone user interface.
For more information on customizing your phone with the available options from the phone user interface, refer
“Customizing Your Phone”.
Web User Interface
In addition to the phone user interface, you can also customize your phone via web user interface. In order to
access the web user interface, you need to know the IP address of your phone.
You can configure the IP phone via web user interface by logging into either of the following two modes having
different sets of configuration privileges:
• Admin Mode
• User Mode
Browser Compatibility
We have tested the phone web interface with following browsers and versions:
• Mozilla Firefox - Version 32.0.3
• Internet Explorer - Version 11.0.9600.16428IS
• Google Chrome - Version 38.0.2125.104

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English