Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 361
PC Port Mode
Upgrading Firmware
DefaultValue
0
Range
Validvaluesare:
0‐Autonegotiate
1‐Fullduplex,10Mbps
2‐Fullduplex,100Mbps
3‐Halfduplex,10Mbps
4‐Halfduplex,100Mbps
Example
network.pc_port.speed_duplex=0
Parameter-
network.PC_port.enable
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablesthePCport.
Note
:Ifyouchangethispar ameter,theIPphonewill
reboottomakethechangetakeeffect.
Format Boolean
DefaultValue 1
Range
Validvaluesare:
0‐Disabled
1‐AutoNegotiation
Example
network.PC_port.enable=1
Parameter-
firmware.url
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheaccessURLoffirmware.
Note
:Ifyouchangethisparameter,theIPphonewill
reboottomakethechangetakeeffect.
Format URL
DefaultValue Blank
Range Stringwithin511characters
Example firmware.url=http://192.168.1.20/2.72.0.1.rom