Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 235
Use Outbound Proxy in Dialog
An outbound proxy server can receive all initiating request messages and route them to the designated destination.
If the IP phone is configured to use an outbound proxy server within a dialog, all SIP request messages from the IP
phone will be sent to the outbound proxy server forcefully.
To use this feature, make sure the outbound server has been correctly configured on the IP phone.
Procedure
Use outbound proxy in dialog can be configured using the configuration files or locally.
To specify whether to use outbound proxy server in a dialog via web user interface:
• Click on Features->General Information.
ConfigurationFile <MAC>.cfg
Specifywhethertouseoutboundproxy
inadialog.
Formoreinformation,refer“Appendix
D‐ConfigurationParameters”.
Local WebUserInterface
Specifywhethertouseoutboundproxy
inadialog.
Navigateto:http://<phoneIPAddress>/
servlet?p=features‐general&q=load