EasyManua.ls Logo

Matrix Sparsh VP110

Matrix Sparsh VP110
522 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Matrix SPARSH VP110 User Guide 313
SNMP
SNMP (Simple Network Management Protocol) is an Internet-standard protocol for managing devices on IP
networks. It is used mostly in network management systems to monitor network-attached devices for conditions
that warrant administrative attention. SNMP exposes management data in the form of variables on the managed
systems, which describe the system configuration. These variables can then be queried (and sometimes set) by
managing applications. The variables accessible via SNMP are organized in hierarchies, which are described by
Management Information Bases (MIBs).
IP phones only support SNMPv1 and SNMPv2. They act as SNMP clients, receiving requests from the SNMP
server. The SNMP server may send requests from any available source port to the configured port on the client,
while the client responds to the source port on the SNMP server. IP phones only support the GET request from the
SNMP server.
The following table lists the basic object identifiers (OIDs) supported by IP phones.
Procedure
SNMP can be configured using the configuration files or locally.
OID Description
1.3.6.1.2.1.37459.2.1.1.0
ThetextualidentificationofthecontactpersonfortheIPphone,togetherwith
thecontactinformation.
Forexample,Sysadmin(root@localhost)
1.3.6.1.2.1.37459.2.1.2.0
AnadministrativelyassignednamefortheIPphone.Ifthenameisunknown,
thevalueisazerolengthstring.
Forexample,IPPHONE
1.3.6.1.2.1.37459.2.1.3.0
ThephysicallocationoftheIPphone.
Forexample,Se
rverRoom
1.3.6.1.2.1.37459.2.1.4.0
Thetime(inmilliseconds)sincethenetworkmanagementportionofthe
systemwaslastreinitialized.
1.3.6.1.2.1.37459.2.1.5.0
ThefirmwareversionoftheIPphone.
1.3.6.1.2.1.37459.2.1.6.0 ThehardwareversionoftheIPphone.
1.3.6.1.2.1.37459.2.1.7.0 TheIPphone’smodel.
1.3.6.1.2.1.37459.2.1.8.0 TheMACaddressoftheIPphone.
1.3.6.1.2.1.37459.2.1.9.0 TheIPaddressoftheIPphone.
1.3.6.1.2.1.37459.2.1.10.0
Thetargetve
rsiontowhichthecurrentversionisautomaticallyupdated.
Format:
MacVersion[*]ComVersion[*]
Forexample,MacVersion[0.0.0.1]ComVersion[0.0.0.1]

Table of Contents

Other manuals for Matrix Sparsh VP110

Related product manuals