Matrix Sparsh VP110

26 Matrix SPARSH VP110 User Guide
Admin Mode
This mode allows you to configure all the parameters applicable to the IP phone after logging into with your
administrator privileges.
To obtain the IP address, press the OK key on the phone. Enter the IP address (e.g., http://192.168.1.181) in
the address bar of a web browser on your PC.
The default administrator username is “admin” (case-sensitive) and password is "1234". IP phones support both
HTTP and HTTPS protocols for accessing the web user interface. For more information, refer “Web Server Type”.
The options you can use to customize the IP phone via phone user interface and/or via web user interface are listed
in the following table:
Options PhoneUserInterface WebUserInterface
Status
√√
-‐IPAddress
‐‐MAC
‐‐Firmware
‐‐Network
‐‐Phone
‐‐Account
BasicPhoneSettings
--Contrast √
√
‐‐Language √
√
‐‐Time&Date √
√
--AdministratorPassword √
√
‐‐KeyasSend √
√
--KeypadLock √
√
‐‐Volume √
‐‐RingTones √
√
‐‐ContactManagement
--Directory
√
--LocalDirectory √
√
‐‐Blacklist √
√
‐‐RemotePhoneBook
√
--CallHistoryManagement √
√
--LogoCustomization
√
‐‐He
adsetPrior
√
--ProgrammableKeys
√
‐‐AccountRegistration √
√
--DialPlan
√
‐‐EmergencyNumber
√
‐‐LiveDialpad
√
‐‐Hotline √
√