Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 27
• The table above lists most of the feature options. Please refer to the relevant sections for more
information.
• In this document, configurations made either using the Phone User Interface or using the Web User
Interface are termed as “Local” configurations since such methods will configure individual IP Phone
parameters.
For mass configuration of IP Phones, the best method is using the “Auto-Provisioning” as described
below.
• To change the default administrator password, refer “Administrator Password”.
BasicCallFeatures
√
‐‐RecentCallInDialing
--AutoAnswer
√
--AutoRedial
√
--CallCompletion
√
--CallReturn
‐‐DND
√
‐‐CallForward
√
‐‐CallTransfer
√
--CallWaiting
√
--Conference
‐‐CallPickup
√
‐‐AnonymousCall
√
--AnonymousCallRejection
√
AdvancedPhoneFeatures
√
--HotDesking
--Intercom
√
--MulticastPaging
--MusiconHold
--Messages
√
SIPAccount
√
‐‐UserOptions
‐‐RegisterStatus
√
‐‐Activation
√
‐‐Label
√
‐‐DisplayName
√
‐‐RegisterName
√
‐‐UserName
√
‐‐Password
√
‐‐SIPServer1/2
√
‐‐ServerOption
--ServerPort
‐‐OutboundStatus
√
‐‐OutboundProxy
√
‐‐NATTraversal
‐‐STUNStatus
√
‐‐STUNSer ver
√