Matrix Sparsh VP110

422 Matrix SPARSH VP110 User Guide
Sending RTP Stream
Receiving RTP Stream
Example
account.1.subscribe_mwi_to_vm=0
Parameter-
multicast.codec
ConfigurationFile
<MAC>.cf g
Description
ConfiguresamulticastcodecfortheIPphoneto
usetosendanRTPstream.
Format string
DefaultValue G722
Range
Validvaluesare:
•PCMU
•PCMA
•G729
•G722
• G723_53
• G723_63
•iLBC
•G726‐32
Example
multicast.codec=G722
Parameter-
multicast.receive_priority.enable
ConfigurationFile
<MAC>.cf g
Description
EnablesordisablestheIPphonetohandlethe
incomingmulticastpagingcallswhenthereisan
activemulticastpagingcallontheIPphone.
Ifitissetto1(Enabled),theIPphonewillanswer
theincomingmulticastpagingcallwithahigher
priorityandignorethatwit
halowerpriority.
Format Boolean
DefaultValue 1
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example
multicast.receive_priority.enable=1