Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 197
Connected Line Identification Presentation (COLP)
Connected Line Identification Presentation (COLP) allows IP phones to display the identity of the connected party
specified for outgoing calls. IP phones can display the Dialed Digits, or the identity in a SIP header (Remote-Party-
ID or P-Asserted-Identity) received, or the identity in the “From” header carried in the UPDATE message sent by
the Callee as described in RFC 4916. Connected line identification presentation is also known as Called line
identification presentation. In some cases, the remote party will be different from the called line identification
presentation due to call diversion.
If the Callee is present in the local directory, the local contact name assigned to the Callee should be preferentially
displayed.
Procedure
COLP can be configured only using the configuration files.
ConfigurationFile <MAC>.cfg
Configurethepresentationofthe
callee’sidentity.
Formoreinformation,refer
“AppendixD‐Configuration
Parameters”.