Matrix Sparsh VP110 User Manual

70 Matrix SPARSH VP110 User Guide
To change the administrator password via phone user interface:
• Press Menu->Settings->Advanced Settings (password: 1234) ->Set Password.
• Enter the current administrator password in the Current PWD field.
• Enter new password in the New PWD field and Confirm PWD field.
Valid characters are ASCII characters 32-126(0x20-0x7E).
• Press the Save soft key to save the change.
User Password
Some menu options are protected by two privilege levels, user and administrator, each with its own password.
When logging into the web user interface, you need to enter the user name and password to access various menu
options.
A user or an administrator can change the user password. The default user password is "1111". For security
reasons, the user or administrator should change the default user password as soon as possible.
Procedure
User password can be changed using the configuration files or locally.
To change the user password via web user interface:
• Click on Security->Password.
• Select user from the User Type list.
ConfigurationFile <MAC>.cfg
Changetheuserpa sswordoftheIP
phone.
Formoreinformation,refer“Appendix
D‐ConfigurationParameters”.
Local WebUserInterface
Changetheuserpa sswordoftheIP
phone.
Navigateto:http://<phoneIPAddress>/
servlet?p=security&q=load

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English