Matrix Sparsh VP110 - Network Conference

Matrix SPARSH VP110 User Guide 405
Network Conference
Example transfer.blind_tran_on_hook_enable=1
Parameter-
transfer.on_hook_trans_enable
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablestheIPphonetocompletethe
semi‐attendedtransferortheattendedtransfer
throughon‐hook.
Format Boolean
DefaultValue 1
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example transfer.on_hook_trans_enable=1
Parameter-
transfer.semi_attend_tran_enable
ConfigurationFile
<MAC>.cf g
Description
Configureswhethertodispla ythemissedcallprompt
onthedestinationparty’sphonewhenperforminga
semi‐attendedtransfer.
Format Boolean
DefaultValue 1
Range
Validvaluesare:
0‐Enabled
1‐Disabled
Example
transfer.semi_attend_tran_enable=1
Parameter-
account.X.conf_type
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheconferencetypeforaccountX.
Ifitissetto0(LocalConference),conferencesareset
upontheIPphonelocally.
Ifitissetto2(NetworkConference),conferencesare
setupbytheserver.
Xis1.