Matrix Sparsh VP110

406 Matrix SPARSH VP110 User Guide
Transfer on Conference Hang Up
Format Integer
DefaultValue
0
Range
Validvaluesare:
0‐LocalConference
2‐NetworkConference
Example account.1.conf_type=0
Parameter-
account.X.conf_uri
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheconferenceURIforaccountX.
Xis1.
Note
:Itworksonlyiftheparameter
“account.X.conf_type”issetto2(Network
Conference).
Format SIPURI
DefaultValue Blank
Range SIPURIwithin511characters
Example account.1.conf_uri=conference@example.com
Parameter-
transfer.tran_others_after_conf_enable
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablesTransferonConferenceHangUp
feature.
Ifitissetto1(Enabled),theothertwopartiesremain
connectedwhentheconferenceinitiatordropsthe
conferencecall.
Note
:Itisonlyapplicabletothelocalconference.
Format Boolean
DefaultValue
0
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example
transfer.tr an_others_after_conf_enable=1