Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 463
Intercom Key
Parameter-
programablek ey.X.line
Note:ThisisapplicabletoLocal
Grouponly;soitisapplicablewhen
programablekey.X.type=45only.
ConfigurationFile
<MAC>.cfg
Description
Configuresthedesiredlinetoapplythekeyfeature.
Fortheprogrammablekey ,xrangesfrom1to14(ForIP
phones,x=1‐9,13,14).
Whenassigningthefollowingfeatures,youdonotneed
toconfigur ethisparameter:
•LocalGroup
Format Integer
DefaultValue 1
Range
Validvaluesare:
1–AllCon
tacts
2–Company
3–Family
4‐Friends
Example
programablekey.X.line=2
Parameter-
programablekey.X.value
ConfigurationFile
<MAC>.cfg
Description
Configuresthevalueforsomekeyfeatures.
Fortheprogrammablekey ,xrangesfrom1to14(ForIP
phones,x=1‐9,13,14).
Format String
DefaultValue Blank
Range Stringwithin99characters
Example
WhenyouassigntheSpeedDialtothememorykey,
thispar ameterisusedtospecifythenu
mberyouwant
todialout.
programablekey.7. value=565
Parameter‐
programablek ey.X.type
ConfigurationFile
<MAC>.cfg
Description
ConfiguresaDSSkeyasanintercomkey.
Thedigit14standsforthekeytypeIntercom.
Format Integer
Value 14