Matrix Sparsh VP110 User Manual

142 Matrix SPARSH VP110 User Guide
Auto Answer
Auto answer allows IP phones to automatically answer an incoming call. IP phones will not automatically answer
the incoming call during a call even if auto answer is enabled. Auto-Answer delay defines a period of delay time
before the IP phone automatically answers incoming calls.
Procedure
Auto answer can be configured using the configuration files or locally.
To configure auto answer via web user interface:
• Click on Account-> Basic.
ConfigurationFile
<MAC>.cfg
Configure autoanswer.
Formoreinformation,refer“Appendix
D‐ConfigurationParameters”.
<MAC>.cfg
Specifyaperiodofdelaytimeforauto
answer.
Formoreinformation,refer“Appendix
D‐ConfigurationParameters”.
Local
WebUserInt erface
Configure autoanswer.
Navigateto:http://<phoneIPAddress>/
servlet?p=account‐
basic&q=load&acc=0
Specifyaperiodofdelaytimeforauto
answer.
Navigateto:
http://
<phoneIPAddress>servlet?p=features‐
g
eneral&q=load
PhoneUserInterface
Configure autoanswer.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English