Matrix Sparsh VP110

362 Matrix SPARSH VP110 User Guide
Parameter-
auto_provision.power_on
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablestheIPphonetoperformanauto
provisioningprocesswhenpoweredon.
Format Boolean
DefaultValue 1
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example
auto_provision.power_on=1
Parameter-
auto_provision.repeat.enable
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablestheIPphonetochecknew
configurationrepeatedly.
Format Boolean
DefaultValue
0
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example
auto_provision.repeat.enable=0
Parameter-
auto_provision.repeat.minutes
ConfigurationFile
<MAC>.cfg
Description
Configurestheinterval(inminutes)fortheIPphone
tochecknewconfiguration.
Note:Itworksonlyiftheparameter
“auto_provision.repeat.enable”issetto1(Enabled).
Format Integer
DefaultValue 1440
Range 1to43200
Example
auto_provision.repeat.minutes=1000
Parameter-
auto_provision.weekly.enable
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablestheIPphonetochecknew
configur ationweekly.