Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 199
Procedure
Configuration changes can be performed using the configuration files or locally.
To configure the method of transmitting DTMF digits via web user interface:
• Click on Account-> Advanced.
• Select the desired value from the DTMF Type list.
• If SIP INFO or AUTO or SIP INFO is selected, select the desired value from the DTMF Info Type list.
ConfigurationFile
<MAC>.cfg
Configurethemethodoftransmitting
DTMFdigitandthepayloadtype.
Formoreinformation,refer
“AppendixD‐Configuration
Parameters”.
<MAC>.cfg
Configurethenumberoftimesforthe
IPphonetosendtheendRTPEvent
packet.
Formoreinformation,refer
“AppendixD‐Configuration
Parameters”.
Local WebUserInterface
Configurethemethodoftr
ansmitting
DTMFdigitsandthepayloadtype.
Navigateto:
http://<phoneIPAddress>/
servlet?p=account‐
adv&q=load&acc=0
Configurethenumberoftimesforthe
IPphonetosendtheendRTPEvent
packet.
Navigateto:
http://<phoneIPAddress>/
servlet?p=features‐general&q=load