Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 243
• If the Alert-Info header contains a remote URL, and the parameter “account.X.alert_info_url_enable” is set
to 1 (the item called “Distinctive Ring Tones” on the web user interface is Enabled), the IP phone will try to
download the WAV ring tone file from the URL and then play the remote ring tone. Otherwise, the IP phone
will play the pre-configured local ring tone in about ten seconds.
Example:
Alert-Info: http://192.168.0.12:8080/Custom.wav
• If the Alert-Info header contains an info text, the IP phone will map the text with the internal ringer text pre-
configured, and then play the ring tone associated with the internal ringer text. Otherwise, the IP phone will
play the pre-configured local ring tone in about ten seconds.
Example:
Alert-Info: info=family;x-line-id=0
Procedure
Distinctive ring tones can be configured using the configuration files or locally.
ConfigurationFile
<MAC>.cfg
Configuredistinctiveringtones.
Formoreinformation,refer
“AppendixD‐Configuration
Parameters”.
<MAC>.cfg
Configuretheinternalringertextand
internalringerfile.
Formoreinformation,refer
“AppendixD‐Configuration
Parameters”.