Matrix Sparsh VP110 User Manual

Matrix SPARSH VP110 User Guide 293
capable of adapting the changes in the network's delay. The range of the delay time for the dynamic jitter buffer
added to packets can be also configured on IP phones.
Procedure
Jitter buffer can be configured using the configuration files or locally.
To configure Jitter Buffer via web user interface:
• Click on Settings->Voice.
• Click the desired option in Type.
• Enter the minimum delay time for adaptive jitter buffer in the Min Delay field.
Valid values range from 0 to 300.
• Enter the maximum delay time for adaptive jitter buffer in the Max Delay field.
Valid values range from 0 to 300.
• Enter the fixed delay time for fixed jitter buffer in the Normal field.
ConfigurationFile <MAC>.cfg
Configurethemodeofjitterbuffer
andthedelaytimeforjitterbuffer.
Formoreinformation,refer
“AppendixD‐Configuration
Parameters”.
Local WebUserInterface
Configurethemodeofjitterbuffer
andthedelaytimeforjitterbuffer.
Navigateto:
http://<phoneIPAddress>/
servlet?p=settings‐voice&q=load

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English