Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 311
To configure the way for the IP phone to check for configuration files via web user interface:
• Click on Settings->Auto Provision.
• Make the desired change(s).
• Click Confirm to save the change.
When the “Power On” is set to On, the IP phone will check configuration files stored on the provisioning
server during start-up and then it will download firmware from the server.
ConfigurationFile <MAC>.cfg
ConfigurethewayfortheIPphoneto
checkforconfigurationfiles.
SpecifytheaccessURLoffirmware.
Formoreinformation,refer
“AppendixD‐Configuration
Parameters”.
Local WebUserInterface
ConfigurethewayfortheIPphoneto
checkforconfigurationfiles.
Navigateto:
http://<phoneIPAddress>/
servlet?p=settings‐autop&q=load