Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 381
Dial Plan
Replace Rule
Dial-now
Parameter-
dialplan.replace.prefix.X
ConfigurationFile
<MAC>.cfg
Description
Configuresthestringyouwanttoreplace.
Xrangesfrom1to100.
Format String
DefaultValue Blank
Range Stringwithin32characters
Example
dialplan.replace.prefix.1=123
Parameter-
dialplan.replace.replace.X
ConfigurationFile
<MAC>.cfg
Description
Configuresthealternatestringinsteadofwhattheuser
enters.
Xrangesfrom1to100.
Format String
DefaultValue Blank
Range Stringwithin32characters
Example
dialplan.replace.replace.1=1
Parameter-
dialplan.dialnow.rule.X
ConfigurationFile
<MAC>.cfg
Description
Configuresthestringusedtomatchthenumbers
enteredbytheuser.
Whenenterednumbersmatchthepredefineddial‐now
rule,theIPphonewillautomaticallydialoutthe
numberswithoutpressingthesendkey.
Xrangesfrom1to100.
Format String
DefaultValue Blank
Range Stringwithin511characters
Example
dialplan.dialnow.rule.1=123