Matrix Sparsh VP110 - Page 401

Matrix SPARSH VP110 User Guide 393
DND Mode
Format Integer
DefaultValue 480
Range
Validvaluesare:
404‐NoFound
480‐Temporari l ynotavailable
486‐Busyhere
Example features.dnd_refuse_code=480
Parameter-
features.dnd_mode
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheDNDmodefortheIPphone.
Itmustbesetto0(Phone)sothatDNDfeatureis
effectivefortheIPphone.
Format Integer
DefaultValue
0
Range 0-Phone
Example features.dnd_mode=0
Parameter-
features.dnd.enable
ConfigurationFile
<MAC>.cfg
Description
EnablesordisablesDNDfeature.
Ifitissetto1(Enabled),theIPphonewillreject
incomingcallsonallaccounts.
Format Boolean
DefaultValue
0
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example
features.dnd.enable=1
Parameter-
features.dnd.on_code
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheDNDoncodetoactivatetheserver‐side
DNDfeature.
Format String
DefaultValue Blank