Matrix Sparsh VP110

410 Matrix SPARSH VP110 User Guide
DTMF
Parameter-
account.X.dtmf.type
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheDTMFtype foraccountX.
Ifitissetto0(INBAND),DTMFdigitsaretransmitted
inthevoiceband.
Ifitissetto1(RFC2833),DTMFdigitsaretransmitted
byRTPEventscomplian ttoRFC2833.
Ifitissetto2(SIPINFO),DTMFdigit
saretransmitted
bytheSIPINFOmessages.
Ifitissetto3(AUTOorSIPINFO),theIPphone
negotiateswiththeotherendtouseINBANDorRFC
2833,ifthereisnonegotiation,usingSIPINFOby
default.
Xis1.
Format Integer
DefaultValue 1
Range
Validvaluesare:
0‐INB
AND
1‐RFC2833
2‐SIPINFO
3‐AUTOorSIPINFO
Example account.1.dtmf.type=1
Parameter-
account.X.dtmf.dtmf_payload
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheRFC2833payloadtype.
Xis1.
Format Integer
DefaultValue 101
Range 96to127
Example
account.1.dtmf.dtmf_payload=101