Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 427
Fallback Mode
Example
account.1.sip_server.1.expires=3600
Parameter-
account.X.sip_server.Y.retry_counts
ConfigurationFile
<MAC>.cf g
Description
ConfigurestheretrytimesfortheIPphoneto
resendrequestswhentheSIPserverYdoesnot
respondcorrectlyforaccountX.
Xis1.
Yrangesfrom1to2.
Format Integer
DefaultValue 3
Range 0to20
Example account.1.sip_server.1.retry_counts=3
Parameter-
account.X.fallback.redundancy_type
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheregistrationmodefortheIPphone
infallbackmode.
Xis1.
Format Integer
DefaultValue
0
Range
Validvaluesare:
0-Concurrentregistration
1-Successiveregistration
Example
account.1.fallback.redundancy_type=0
Parameter-
account.X.fallback.timeout
ConfigurationFile
<MAC>.cfg
Description
Configuresthetimeinterval(inseconds)fortheIP
phonetodetectwhethertheworkingserveris
availablebysendingtheregistrationrequestafter
thefallbackservertakesovercallcontrol.
Itisonlyapplicabletosuccessiveregistrationmode.
Xis1.
Format Integer
DefaultValue 120