Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 431
VLAN
Parameter-
network.lldp.enable
ConfigurationFile
<MAC>.cf g
Description
EnablesordisablesLLDPfeatureontheIPphone.
Note
:Ifyouchangethisparameter,theIPphone
willreboottomakethechangetakeeffect.
Format Boolean
DefaultValue 1
Range
Validvaluesare:
0‐Disabled
1‐Enabled
Example network.lldp.enable=1
Parameter-
network.lldp.packet_interval
ConfigurationFile
<MAC>.cf g
Description
Configurestheamountoftime(inseconds)
betweenthetransmissionsofLLDPpacket.
Note
:Ifyouchangethisparameter,theIPphone
willreboottomakethechangetakeeffect.Itworks
onlyiftheparameter“network.lldp.enable”isset
to1(Enabled).
Format Integer
DefaultValue 60
Range 1to3600
Example network.lldp.packet_interval=60