Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 437
802.1X
Parameter-
network.802_1x.mode
ConfigurationFile
<MAC>.cfg
Description
Configuresthetypesofthe802.1Xauthenticationto
useontheIPphone.
Note
:Ifyouchangethisparameter,theIPphone
willreboottomakethechangetakeeffect.
Format Integer
DefaultValue
0
Range
Validvaluesare:
0‐Disabled
1‐EAP‐MD5
2‐EAP‐TLS
3‐PEAP‐MSCHAPv2
4‐EAP‐TTLS/EAP‐MSCHAPv2
Example network.802_1x.mode=1
Parameter-
network.802_1x.identity
ConfigurationFile
<MAC>.cfg
Description
Configurestheidentityusedforauthenticatingthe
IPphone.
Note
:Ifyouchangethisparameter,theIPphone
willreboottomakethechangetakeeffect.
Format String
DefaultValue Blank
Range Stringwithin32characters
Example network .802_1x.identity=admin
Parameter-
network.802_1x.md5_password
ConfigurationFile
<MAC>.cf g
Description
Configuresthepasswordusedforauthenticating
theIPphone.
Note
:Ifyouchangethisparameter,theIPphone
willreboottomakethechangetakeeffect.Itisonly
applicabletoEAP‐MD5,PEAP‐MSCHAPv2andEAP‐
TTLS/EAP‐MSCHAPv2protocols.
Format String