Matrix Sparsh VP110

Matrix SPARSH VP110 User Guide 441
IPv6
Example
managementserver.periodic_inform_interval=
60
Parameter-
network.ip_address_mode
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheIPaddre ssmode.
Note
:Ifyouchangethisparameter,theIPphone
willreboottomakethechangetakeeffect.
Format Integer
DefaultValue
0
Range
Validvaluesare:
0‐IPv4
1‐IPv6
2‐IPv4&IPv6
Example network.ip_address_mode=1
Parameter-
network.ipv6_internet_port.type
ConfigurationFile
<MAC>.cfg
Description
ConfigurestheIPv6addressassignmentmethod.
Note
:Ifyouchangethisparameter,theIPphone
willreboottomakethechangetakeeffect.
Format Integer
DefaultValue
0
Range
Validvaluesare:
0‐DHCP
1‐StaticIPAddress
Example network.ipv6_int ernet_port.type=0
Parameter-
network.ipv6_static_dns_enable
ConfigurationFile
<MAC>.cfg
Description
Enablesordisablesthephonetousemanually
configuredstaticIPv6DNSwhentheparameter
“network.ipv6_internet_port.type”issetto0
(DHCP).
Note
:Ifyouchangethispar ameter,theIPphone
willreboottomakethechangetakeeffect.
Format Boolean
DefaultValue
0