Matrix Sparsh VP110

468 Matrix SPARSH VP110 User Guide
auto_provision.dhcp_option.list_user_options = !NULL!
#Enables or Disable to use the AES key for the Auto Provision.0(default) or 1.
auto_provision.aes_key_in_file = 0
#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG file.
auto_provision.aes_key_16.mac =
#Configure the mode of downloading configuration files for the phone. The value
is 0(default) or 1.
auto_provision.update_file_mode = 0
#enables or disables zero touch for the phone to perform provisioning during
startup.0(default) or 1.
zero_touch.enable=0
#configures the duration time (in seconds) of the phone displaying the zero-sp-
touch configuration screen when powered on. The default value is 5.Integer from 1
to 100
zero_touch.wait_time =10
################################################################################
#######
## Configure the access URL of firmware
##
################################################################################
#######
#Before using this parameter, you should store the desired firmware (.70.x.x.rom)
to the provisioning server.
firmware.url = http://192.168.153.27:8081/Matrix SPARSH VP110/31.72.196.1.rom
################################################################################
#######
## Network Settings ##