Matrix Sparsh VP110 - Page 499

Matrix SPARSH VP110 User Guide 491
features.send_pound_key =0
#enables or disables the phone to forward incoming calls to international
numbers.0-Disabled, 1-Enabled(default).
forward.international.enable=1
#enables or disables forward diversion feature.0-Disabled, 1-Enabled(default).
features.fwd_diversion_enable =1
#enables or disables the phone to enter Transfer to menu during multiple calls
when pressing the transfer soft key or TRAN key.0-Disabled, 1-Enabled(default).
transfer.multi_call_trans_enable =1
#configures the web access time-out (in minutes).The default value is 5.It takes
effect after a reboot.Integer from 1 to 1000.
features.relog_offtime =600
#configures the characters the phone filters when dialing.
#If the dialed number contains configured characters, the phone will
automatically filter these characters when dialing.The default value is “-,”.
#String within 99 characters.
#Web UI Path--->Features-->General Information-->Call Number Filter.
features.call_num_filter =-,
#configures the logo mode of the LCD screen.0-Disabled,1-System logo(Default),2-
Custom logo
phone_setting.lcd_logo.mode =1
#configures the access URL of logo file.The default value is blank.URL within 511
characters.
lcd_logo.url =http://192.168.153.27:8081/matrix.dob
#enables or disables the phone to make an IP call directly.0-Disabled, 1-
Enabled(default).
features.direct_ip_call_enabe =1
#enables or disables the phone to play the warning tone when receiving a voice
mail.0-Disabled, 1-Enabled(default).
features.voice_mail_tone_enable =1
#configures the client host name for DHCP option 12.The default value is Matrix
SPARSH VP110.
#Web UI Path--->Features-->General Information-->DHCP Hostname.
network.dhcp_host_name =Matrix SPARSH VP110