494 Matrix SPARSH VP110 User Guide
#local_time.time_zone_name = India(Calcutta)
local_time.time_zone_name = India(Calcutta)
#Configure the domain name or the IP address of the NTP server. The default value
is cn.pool.ntp.org.
local_time.ntp_server1 = !NULL!
local_time.ntp_server2 = 192.168.153.222
#Configure the update interval (in seconds) when using the NTP server. The
default value is 1000.15 to 86400s
local_time.interval = 1000
#Configure the daylight saving time feature; 0-Disabled, 1-Enabled, 2-Automatic
(default);
local_time.summer_time = 0
#Configure the DST type when the DST feature is enabled; 0-By Date (default), 1-
By Week;
local_time.dst_time_type = 0
#Configure the start time of DST. The default value is 1/1/0.
#If the DST type is configured as By Date, the value format is Month/Day/Hour.
For example, the value 5/20/10 means the start time is at 10:00 on May 20.
#If the DST type is configured as By Week, the value format is Month/Day of Week/
Day of Week Last in Month/Hour of Day.
#For example, the value 1/4/2/5 means the start time is at 5 o'clock on Tuesday
of the 4th week in January.
local_time.start_time = !NULL!
#Configure the end time of DST. The default value is 12/31/23. The value format
is the same to the start time.
local_time.end_time = !NULL!
#Configure the offset time (in seconds). It ranges from -300 to 300, the default
value is 60.
local_time.offset_time = !NULL!
To Next Page
Loading...
