496 Matrix SPARSH VP110 User Guide
## Dial Plan ##
################################################################################
#######
#configures the entered number to be replaced.String within 32 characters.X
ranges from 1 to 100.String within 32 characters.
dialplan.replace.prefix.X =
#configures the alternate number to replace the entered number. The default value
is blank.String within 32 characters.
dialplan.replace.replace.X=
#configures the dial now rule.The default value is blank.(X ranges from 1 to
100).String within 511 characters.
dialplan.dialnow.rule.1 =5xx
#configures the delay time (in seconds) for the dial-now rule.)The default value
is 0.Integer from 1 to 14.
phone_setting.dialnow_delay =0
#configures the area code.The default value is blank.String within 16 characters.
dialplan.area_code.code =+91
#configures the minimum length of the number prefixed with the area code.The
default value is 1.Integer from 1 to 15.
dialplan.area_code.min_len=5
#configures the Maximum length of the number prefixed with the area code.The
default value is 1.Integer from 1 to 15.The value must be larger than the minimum
length.
dialplan.area_code.mac_len=8
#configures the block out string.The default value is blank.String within 32
characters.
dialplan.block_out.number.1 = 5532
dialplan.block_out.number.2 = 5858
dialplan.block_out.number.3 =
dialplan.block_out.number.4 =
dialplan.block_out.number.5 =
dialplan.block_out.number.6 =
dialplan.block_out.number.7 =
dialplan.block_out.number.8 =
dialplan.block_out.number.9 =
dialplan.block_out.number.10 =
To Next Page
Loading...
